Gear Trays - Standard Switch Start

Base
The base of the gear tray is made of 0.6mm bright spangled galvanised steel.

Chokes
All gear trays utilise the Tridonic.Atco EC compact ballast. The unit has a TW rating of 130°C
Certified: EN60920/921- CELMA class (EEI=B2) specification for switch start ballasts.

Cables
Both single and twin cables (lamp lead) are 0.8mm solid conductor with a 105 degree maximum rating. Cable is high temperature PVC T13 insulated: BS7655

Starter switches
Standard Philips (S10, S2, S16) glow starter to: BS60155

Lamp holder/starter holders
Lamp holders and starter holders are made of a polycarbonate material. Lamp holders are a shrouded push-on design with push wire terminations. Starter holders are snap-in type with push wire terminations. Lamp holder/starter holder to: EN60400/EN6702

Capacitors
These have a flame-retardant plastic case mounted to the base by a blip clip snap-in fixing. Inside can is a metalised polypropylene film. Cable connection is by a wire grip connector complete with discharge resistor. Operating temperature range -25° to 85°C max: EN61048/61049

Fused Terminal Block
Fuse block is manufactured from polycarbonate. Mains connection is by way of screw termination. Fuse carrier utilises a BS1362 fuse.
Standard: EN60598-1

All gear trays are CE approved.
Tridonic magnetic chokes – standard 3 year warranty
All other components are guaranteed for 12 months.